MDC2 Series Single Valve MDC2X25XGAEXCGA

  • Can achieve Category 2, PL c, when used with proper safety controls
  • The “fail-to-safe” safety function is ensured as long as the poppet is able to go back into the start position
  • The Cat 2 version (MDC2) of the MDC Series is equipped with a solid state pressure sensor.
  • Monitoring the sensor on each actuation and de-actuation of the MDC2 Series valve provides a diagnostic coverage between 60% < 90%
  • Poppet Design that is dirt tolerant, wear compensating for quick response and high flow capacity
  • PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
  • On energization, the Soft-Start (EEZ-ON®) allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
  • Threaded or modular port connection allows connection to Air Entry System (Lockout Valve, FRLs)
  • Threaded exhaust port for canister silencer or remote exhaust
  • SISTEMA Library available for download

Need Help? No Problem!

Technical & Customer Service

+44 (0)1254 872277

Need Help? No Problem!

Technical & Customer Service

+44 (0)1254 872277


Product Information

Series MDC
Valve Function 3/2 Single Solenoid
Construction Poppet
Actuation Electrical
Lockout Not Included
Monitoring External
Feedback Pressure Switch (PNP)
Reset Not Included
Exhaust Type Threaded Female Port
Thread Type G
Feedback Rating 5 amps at 250 volts AC, or 5 amps at 30 volts DC
Voltage 24 VDC
Feedback Connection M12
Pressure Gauge Analog Gauge
Ambient Temperature Range (Celcius) 4 to 50
Media Temperature Range (Celcius) 4 to 80
Flow Media Compressed Air
Valve Body Material Aluminum
Poppet/Spool Material Acetal and Stainless Steel
Seal Material Buna-N
Safety Category Category 2
PL Rating PL c
Safety Integrity Level SIL 1
DGUV Certification Pending
CE Certification Yes
EAC Declaration Yes
CSA/UL Certification Yes
Soft Start Not Included
Basic Size 1"
Exhaust Size 1-1/2"
Thread Type NPT
Operating Pressure (bar) 2.5 to 10.3
Weight (kg) 4.24
Mounting Inline
Inlet Size 3/4"
Outlet Size 3/4"
Solenoid Connection DIN EN 175301-803 Form A